We have received some support requests from customers with regards to the internal adjustment range and total available windage and elevation travel.
The internal windage travel totals 20 MILs, but you can only dial to 5L and 5R after you set your zero. There’s an over-rotation limiter on the windage knob that prevents you from going past 5 MILs in either direction since there is no turn indicator on the windage.
After you set your zero, and reset the knobs to the 0 setting, you’ll have 10 MIL of wind adjustment total (5L and 5R).
On the elevation knob there’s a total of 32 MILs of internal adjustment, but it's limited by the use of the physical Zero Stop system to a maximum of approximately 29.5 MILs or so after you set your zero, due to the mechanics of the system.
This is, of course, completely dependent on your rifle / ammunition ballistics, as well as the cant of your scope mounting systems (i.e. base cant + rings/mount cant ratings, for example 20MOA, 40MOA, or 60MOA).
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article